![]() For the setup, you will need a graphics card that is seated within your gaming PC, this will be most likely a AMD, or Nvidia graphics card. To fix this, there are two methods: Capture HDMI audio from Cam Link - Method 1. When using Cam Link to capture video as well as audio, there may be no audio captured. This may be something that needs an iOS update to resolve. Elgato Game Capture HD60 If you have a display that goes beyond that resolution you might have to reduce the settings as mentioned later on in this article, for everything to work as expected. Recommended settings (With 1080p60 input) Resolution: 1920x1080. Once that is working stably to the Operating System, then work on using that signal in OBSĪnother real possibility is simply Apple's lack of following standards, especially around USB-C. And using OBS simply adds too many variables to facilitate quick troubleshooting.īe sure to be aware of the actual resolution, frame rate, color depth, etc of the incoming/captured video signal > Please do not do anything else during the firmware update process 5. Move to the 'Device' tab and try a firmware update for the Elgato Game Capture HD60 X. Set the audio format to 48Khz The native audio. Use OBS Studio OBS-MP is a complete rewrite of OBS, which fixes many low level issues and has better optimizations. Run the 4K Capture Utiliy, hold 'CTRL' and open the preferences. In this short guide, I will cover how to best setup the HD60 Pro in OBS, for maximum quality and low latency. My suspicion is that the video signal stability issue exists outside of OBS. Buy Elgato HD60 X - Stream and record in 1080p60 HDR10 or 4K30 with ultra-low latency on PS5, PS4/Pro, Xbox Series X/S, Xbox One X/S, in OBS and more. Remove the HDMI cabling from the Elgato Game Capture HD60 X. I use HD 60 S+ to acquire PS5 video and Elgato Facecam but OBS Studio (27.2.4 64-bit, windows) prevents me from activating both video sources at the same time. I need help with this problem and i hope someone will help me. Either that or very well-known open-source (relatively simple) recording software (vs OBS sophisticated compositing capability). Hello everyone, im Michele and nice to meet you. There are plenty of Operating System native viewers one can use to monitor the captured signal. As I regularly advise for audio and video input troubleshooting - start outside of OBS (OBS not running) However, when using the Elgato software, no such issue occurs. As soon as the resolution is changed to 720p, the issue is gone. ![]() I suspect OBS has nothing to do with the problem, rather OBS is only where the problem is noticed. The issue is as follows: Using an Elgato HD60 Pro on a 1080p setting, the audio crackles/pops in OBS even when just previewing the output. ![]() A number of comments above indicate they think the issue is OBS.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |